Level Kit

[mxz800rob]

Does anyone have the physical dimensions on the block to level the front of a Chev truck?

[kdixer]

Does anyone have the physical dimensions on the block to level the front of a Chev truck?

 

 

If you have the means to manufacture, you should also have the means to measure. A helpful tip, the lift ratio on a gmt 900 is about 1.8. In other words a 1.25" spacer will give you 2.25" of lift.

[badfnz]

1" thick, 6 3/8" long at the longest side, 5 1/2" long at the shortest side, 3 5/16" wide.

[brycer867]

I know this is an old post and there is tons of discussion on this but i just bought what i was told on ebay was a 2.5" leveling kit. So according to this post the only way it could be a true 2.5 leveling kit would be by having a spacer 1.38" thick (1 and 3/8 would be close) thats using the 1.8 to 1 ratio. I was shipped only .75" thick and i didnt measure before so im not sure how high the truck actually went up. Thoughts?

[DBK81]

I made my own, mine were 1.25" thick, and I went up a full two inches, I am now 39.5" on all 4 corners on my '07 new Gen Crew Cab Chevy